BEST BOATCLEANINGPRODUCTSIN ANTIGUA
Bringing the complete Starke line of premium marine-grade yacht detailing products to Antigua. Professional-grade results for every hull.
Bringing the complete Starke line of premium marine-grade yacht detailing products to Antigua. Professional-grade results for every hull.
Liquid KrakenStarke
Liquid Kraken is a true marine grade graphene coating that is formulated specifically for gel coat and marine paints. The low VOC solvent based formula carries a high concentration of graphene oxide which forms a monolithic layer of protection one atom thick. This ultra slick finish is known to reduce water spotting by approximately 50%. Reduced water spotting is the number one selling point on why a boat owner would select a Liquid Kraken over a SiO2 based coating like Liquid Thor. SiO2 and Graphene based coatings have relatively the same level of gloss and durability. The life span of the coating will be a function of how often the vessel is used, stored and maintained. A general time frame would be roughly up to 12 to 24 months of protection before you would reapplication. Application requires preparation and respect. Surface must be fully corrected and decontaminated before Kraken touches it. IPA prep removes polishing residue that would prevent bonding. Apply with a suede applicator — 4 to 10 drops depending on surface area, thin and consistent strokes. The coating appears dark when wet. That is normal. That is the graphene. Watch for the corduroy pattern — when your application strokes become clearly visible across the surface, flash is complete and leveling begins. Two clean microfibers: primary towel to remove, insurance towel to catch any high spots. Twenty-four to 48 hours initial cure with no water contact. Seven to 14 days for full hardness development. Liquid Kraken works on most surfaces — gelcoat, marine paint, powder coat, and glass.
XanigoOther
The Xanigo Marine solution Powered by Goldshield prevents and protects against mold and mildew for up to 90 days with just one application! When applied with our Xanigo Marine Sprayer, this system STOPS mold and mildew cold! Eliminate mold and mildew from seats, life jackets, canvas, ropes, carpet and areas with high moisture. DETAILS: EPA approved - Reg. 85556-2 Long-lasting residual protection World's only patented organ silane compound, providing greater protection No alcohol and non-flammable Water based Long shelf life of 1.5 years unopened, 1 year opened INCLUDES: 32oz of Xanigo Marine Mold & Mildew Prevention Solution
VenomStarke
Venom is a new generation water spot remover that is safe to use on finishes that have been ceramic coated. In addition, it is also safe to use glass, paint, gel coat, and metal. The formula has a consistency that allows it to gel to the substrate where it then starts to lightly eat away at minerals and other contaminants. Venom can also be used as a pre wipe before buffing or light polishing. This benefit allows you to save a massive amount of time because you are able to begin polishing a very clean substrate which make your job easier. We are confident when we say there is nothing else out there on the market like this. Developed by professional detailers, this is a must have product in your arsenal!
Simple CleanStarke
Starke Simple Clean (SSC) is an MPC (multi - purpose cleaner) designed to tackle all of those tough stains where Pure Clean just isn’t strong enough. We recommend this product be used ion lockers, bilges, vinyl cushions, plastic, engine rooms, etc. SSC also makes an unbelievable pad cleaner as it loosens caked polish and wax easily while “simply” rinsing away quickly without chasing suds. SSC is also an excellent black streak remover on all gel coat & paints, but we really only recommend this prior to polishing & sealing as Simple Clean will remove waxes if used regularly as most MPC’s do but fail to tell you. SSC also does a fantastic job on cleaning non-skid decks, especially at getting compound stains after the cutting phase of the polishing.
ReplenishStarke
Replenish is safe to use on gel coat, paint, metal, plastic and glass. This product can be used to thicken any ceramic coating or silica-based sealant and should be applied every 1-3 months! Use more frequently in high profile areas. Can be layered for increased gloss and protection. For hydro application, (larger surface areas) we recommend using a 1 gallon/liter pump sprayer to evenly distribute the coating. After hosing off the material, we recommend using a blower to remove any excess water. A rinse down with mineral free water will yield best results. Allow coating to dry and cure for 2 hours. For spray on, wipe off application, simply mist formula onto a clean and cool surface. Work in material with one microfiber and remove excess with second clean microfiber always keeping second microfiber clean and dry. Ultra plush microfibers work best for removing excess.
Pure CleanStarke
Looking for the perfect everyday maintenance soap that won't strip any waxes or sealants? Then Pure Clean is the choice for you, this Highly concentrated formula allows for maximum suds and foaming action while washing. This Results in less scratching and swirls left on the paint or gel coat from contaminants being on the surface. Pure Clean works great when sprayed out of a Foam Cannon or when filling a bucket. Safe on all Marine Surfaces.
